Dr. Munira Batool

• IEEE Member: 93978898
• Registered Engineer at Pakistan Engineering Council. ELECT / 22871
• Senior Design projects Committee (2019- Present)
• Quality Enhancement Committee of EED (2019-present)
• Teaching Staff Association (TSA) UET Taxila (2008-Till date)
• Curtin University Student Guild Society (2015-2019)
• Time Table Committee for EED UET Taxila (2011-2015)
• Notice Board Committee EED UET Taxila (2009-2010)

• From February 2021 – Till date (University of Engineering & Technology Taxila, Pakistan)
  Designation: Assistant Professor and Postgraduate Research Supervisor (Full Time)
  Department: Department of Electrical Engineering
• From May 10, 2018 – Till date (Engineering Institute of technology, Perth Australia)
  Designation: Online Lecturer, Unit Coordinator and Research Supervisor (Part time)
  Department: Department of Electrical Engineering
• From April 2019 – February 2021 (University of Engineering & Technology Taxila, Pakistan)
  Designation: Lecturer and Research Supervisor (Full Time)
• From August 1, 2015 – December, 2018 (Curtin University of technology, Perth Australia)
  Designation: Sessional Academic
  Department: Department of Electrical Engineering and Computing
• From Oct 23, 2013 – April 2015 (University of Engineering & Technology Taxila, Pakistan)
  Designation: Lecturer
  Department: Department of Electrical Engineering
• From Dec 02, 2008 – Oct 22, 2013 (University of Engineering & Technology Taxila, Pakistan)
  Designation: Lead Electrical Engineer/ Laboratory Engineer
  Department: Department of Electrical Engineering
• From May 02, 2008 – Dec 01, 2008 (Wah Engineering College, Wah Cantt, Pakistan)
  Designation: Demonstrator
  Department: Department of Electronics Engineering

• From April 15, 2015 – May 2019 (Curtin University of Technology, Perth Australia)
  Designation: PhD Research Scholar
  Research Group: Centre for Smart Grid and Sustainable Power Systems
  Department: Department of Electrical Engineering and Computing
• From March, 2011 – April 10, 2015 (UET Taxila, Pakistan)
  Designation: Research Engineer/ MS Scholar
  Research Group: Power System and Energy Laboratory
  Department: Department of Electrical Engineering

• Masters in Electrical Engineering Courses
• Advanced Diploma Courses in Electrical Engineering

Years of Experience (at EIT): 3.5 Years
Total Experience: 13 Years

• Post Graduate Thesis:

1. 1. Modelling and performance evaluation of an LCL filter in a grid-connected photovoltaic (PV) inverter system (completed)
   2. Computation and analysis of lightning impulse discharge current on surge arresters connected to a down conductor on a lightning protection system (completed)
   3. Integration of synchronous machine with flywheel to optimize LSPV grid support (completed)
   4. Harmonic distortion Analysis and its reduction using cost effective filteration technique for 132kV network(completed)
   5. Study of Smart Metering Infrastructure Implementation in South Africa (in progress)
   6. Speed control and efficiency enhancement of Electric Vehicles in Smart Grids(in progress)
   7. Condition monitoring of renewable energy based standalone microgrids (in progress)
   8. Development and Utilization of Rooftop Photovoltaic (PV) modules (in progress)

• Undergraduate Final Year Projects:

1. 1. Development of Breakdown Voltage Tester for Liquid Dielectrics of High Voltage (HV) Transformers (completed)
   2. Medium Voltage Substation Upgrade and Automation (completed)
   3. Control and automation of residential generator by utilizing IOT (completed)
   4. Automation of Raw Water Dam Energy Station (completed)
   5. Intelligent Energy Management for Low voltage distribution Networks (completed)
   6. Dust removing system for PV systems (completed)
   7. Modelling and implementation of DSTATCOM for distribution networks (completed)
   8. Smart grid smart meters application using IOT technique (completed)
   9. Programming and implementation of an autonomous obstacle avoiding robot(completed)
   10. Design and implementation of rooftop photovoltaic system in matlab Simulink (completed)
   11. PLC-Based Vessel Propulsion Controls for Controllable Pitch Propellers (in progress)
   12. Poly-energy source integration (in progress)
   13. Design and Implementation of D-STATCOM for Solution of Power Quality Problems(in progress)

1. Munira Batool, Syed M. Islam and Farhad Shahnia, “Market Model for Clustered Microgrids Optimisation including Distribution Network Operations”, IET Generation, Transmission and Distribution, Vol. 13, Issue 22, pp 5139-5150, 2019.
2. Munira Batool, Farhad Shahnia and Syed M. Islam, “Impact of scaled fitness functions in a floating-point genetic algorithm to optimize the operation of standalone microgrids”, IET Renewable Power Generation, vol. 13, Issue 8, pp 1280-1290, 2019.
3. Munira Batool, Farhad Shahnia and Syed M. Islam, “A multi-level supervisory emergency control for the operation of remote area microgrid clusters”, Journal of Modern Power Systems and Clean Energy, Volume 7, Issue 5, pp 1210–1228, 2019.
4. Syed Imran Ahmed Shah, Munira Batool, Abdul Kahliq and Fawad Nawaz, “DC Fault Protection Strategy for Medium Voltage Integrated Power System: Development and Assessment”, Arabian Journal of Science and Engineering, Springer, Vol. 48, issue 6, pp 2859-2872, 2018.
5. Munira Batool, Aftab Ahmed, “Mathematical Modeling and Speed Torque Analysis of Three Phase Squirrel Cage Induction Motor using Matlab Simulink for Electrical Machines Laboratory”, International Electrical Engineering Journal (IEEJ), Vol. 4 (2013) No. 1, pp. 880-889,2013.

1. Pius Sule, Munira Batool, Yuanyuan Fan, “Modeling and Performance Assessment of an Efficient Photovoltaic based Grid-Connected Inverter System with Integration of LCL Filter”, Australian Universities Power Engineering Conference (AUPEC), Perth, 2021.
2. Munira Batool, I. Farooq, A. Nawab, A. Basit and U. Ayub, “Cost Effective Automated Technique for Oil Condition Monitoring of Transformers”, International Conference on Smart Grids and Energy Systems (SGES), Australia, 2020.
3. A. Nawab, I. Farooq and Munira Batool, “A Comparative Analysis for Selection of Suitable Insulator Material Used in High-Voltage Applications”, IEEE International Multi Topic Conference (IEEE INMIC), Pakistan, 2020.
4. S. Aslam, Y. Bukhari, S. Hannan, F. Nawaz, F. Paracha and Munira Batool, “Performance Analysis of MPC for MIMO system in Presence of hard constraints”, International conference on Electrical, Communication and Computer Engineering ICECCE, 2019.
5. Munira Batool, Syed M. Islam and Farhad Shahnia, “Power transaction management amongst coupled microgrids in remote areas”, IEEE PES Innovative Smart Grid Technologies (ISGT), Auckland, 2017.
6. Munira Batool, Syed M. Islam and Farhad Shahnia, “Master control unit based power exchange strategy for interconnected microgrids”, 27th Australian Universities Power Engineering Conference (AUPEC), Melbourne, 2017.
7. Munira Batool, Syed M. Islam and Farhad Shahnia, “Selection of sustainable standalone microgrid for optimal operation of remote area town”, One Curtin Postgraduate Conference (OCPC), Malaysia, 2017.
8. Fawad Nawaz, Munira Batool, “Implementation of Block Processing Algorithm for FIR Filter Using Manufacturer Provided Components” One Curtin Postgraduate Conference (OCPC), Malaysia, 2017.
9. Munira Batool, Syed M. Islam and Farhad Shahnia, “Stochastic modelling of the output power of photovoltaic generators in various weather conditions”, 26th Australian Universities Power Engineering Conference (AUPEC), Brisbane, 2016.
10. Munira Batool, Fawad Nawaz and Syed Imran, “Voltage Control Technique for Stable Operation of SCIM using Direct-Quadrature Transformation”, International Multi-topic Conference (INMIC), Pakistan, 2016.DOI: 10.1109/INMIC.2016.7840107.